Voltech Instruments - Power Analysers & Wound Component Testers

Voltech Wound Component Testers

Voltech offer an excellent range of products for testing transformers, inductors and other wound products. The selection table below gives details of the basic features and more information can be found on all of the products below.

Model	Description	HiPot AC and DC	LCR function	Data Sheet / Manual
AT3600	The AT3600 is the industry standard for production testing wound components.	Integral 5kV AC/ 7kVDC Hi-Pot	No	Data Sheet User Manual
ATi	Automatic high speed transformer testing, plus an LCR meter, all in one.	No	Yes	Data Sheet User Manual
DC1000	Breakthrough technology! 25A (250A with 10 in parallel) bias supply works with AT series testers or ANY LCR meter.	N/A	N/A	Data Sheet User Manual

AT3600 - Automatic High Voltage Transformer Test System

The AT3600, with its patented digital measurement techniques, has revolutionised transformer testing throughout the world. The AT3600 is the only tester available that successfully combines high and low voltage testing in one station to provide speed, accuracy, flexibility and reliability all in one package.

The AT3600 is the industry standard for testing wound components.

Fast and highly Accurate, 10 standard tests per second at a basic 0.05% accuracy
Integral 20 node matrix to test 10 windings in 4 wire Kelvin mode
Integral 5kV AC/ 7kVDC Hi-Pot
Easy operation in Production Lines with Pass /Fail indication
Stand-alone or network capability with PC software
Easy to program Editor Software package with graphic Winding diagrams
Server Software exports results for 100% Quality Auditing.
Un-beatable Testing Specifications: DC-3MHz, 1nH-1MH, 1mV-270V, 1mA-250A DC Bias with additional DC1000
Testing Solutions for Laminates, Ferrites, Chokes, Current Transformers, Telecom & Audio
Over 40 different Tests to match your measurement needs

The AT3600 is available is three base configurations, basic, standard and gold.

The AT3600 Basic Package is for companies that manufacture laminate or ferrite-based coils and transformers. This test package out-performs everything else on the market because of its incredible speed and accuracy. The Basic AT3600 includes Continuity (CTY) and AC Hipot (HPAC) tests plus an additional four test parameters from the list of available test options. The Basic AT3600 also includes one fixture plate and Voltech PC Editor and Server software.

The AT3600 Standard Package is the most popular package. It is the industry standard for companies that manufacture a combination of laminate and ferrite core devices (transformers, coils, sensors, filters, armatures and stators). The Standard AT3600 includes Continuity (CTY) and AC Hipot (HPAC) tests plus an additional twelve test parameters from the list of available test options. The Standard AT3600 also includes one fixture plate and PC Editor and Server software.

The AT3600 Gold Package is ideal for companies that manufacture a large variety of wound components. The Gold AT3600 includes all currently available tests (except "X" tests and database connectivity) plus all new tests, free-of-charge, as they become available. Also included with the Gold AT3600 are a universal fixture plate as well as the Voltech PC Editor and Server software.

Back to top

ATi - Automatic Transformer Tester and LCR Meter

The ATi has all the features you would expect from a precision LCR meter, but it is also a high-speed production tester and development aid.

The ATi is a fantastic tool for all areas of transformer and inductor test and analysis. From the design lab through to production testing the ATi has it all covered in a package that starts at just £3,995*! (*Excluding VAT and delivery).

Designed to test ferrite type transformers
Offers unlimited frequency selection from 20Hz-3MHz
Impressive base accuracy of 0.05%
Can be configured with over 30 measurement parameters
Ideal for high-speed production testing or manual impedance measurements
Testing of multiple windings within a test routine, not only primary to secondary but also secondary-to-secondary windings
Typical ferrite transformer tested in under 2 seconds
DC bias current up to 250A with the DC1000
Prototyping, incoming inspection, and key for R&D bench measurements

The ATi is available is three base configurations, basic, standard and gold.

The Basic Package includes all you need to get started. Continuity (CTY) plus ANY 5 tests.

The Standard Package includes continuity (CTY) plus ANY 15 Tests. Suitable for a larger variety of transformers.

The Gold Package includes all tests PLUS all new tests as they become available.

Back to top

DC1000 - Precision DC Bias Unit

DC1000 Precision DC Bias Unit

Breakthrough technology! 25A (250A with 10 in parallel) bias supply works with AT series testers or ANY LCR meter.

Precision 0-25A DC Bias Current Source with 3MHz Bandwidth.

Applies bias current to chokes and transformers so that inductance can be tested under working conditions (0-25A with 10mA resolution)
World’s first bias unit stackable to 250A (10 units in parallel)
BREAKTHROUGH DESIGN - smaller, lighter, easy to connect and use than any other bias source
Can be used stand-alone with almost any LCR meter and in production testing with the AT3600 and Ati transformer testers
Replacement for Wayne Kerr, HP and other manufacturer’s designs
PC sweep software included for plotting inductance vs. DC bias current

Back to top

Back to products page