This is a selection of BNC's most popular products.
Please call us if you do not find what you are looking for and we will be pleased to help.
Model 507 - Current Pulse Generator
- Peak Output to 25A
- Independent Digitally Controlled Outputs
- Compliance Voltage to 45V
- Selectable Delay and Pulse-width
- Quick Recall of up to 12 System Configurations
- RS232 Computer Interface
- On-Screen Menus and Help
- Single Shot & External Trigger Modes
- TTL Sync Signal Output
- Rackmount Available
|

|
Model 507
2, 4 and 8
channel models |
Model 575 - Digital Delay/Pulse Generator
- 250pS Delay & Width resolution
- 50pS channel Jitter/800pS RMS Ext jitter
- Independent clock rates for each channel
- Clock in & Clock Out
- Programmable (Ethernet/USB/RS232/GPIB)
- Combine Electrical & Optical Outputs
- Dual Inputs (Gate + Trig / 2 Trig)
|

|
Model 575
2, 4 and 8 channel models |
Model 645 - 50MHz Arbitrary Waveform/
Function Generator
- 50MHz sine, 10MHz Arbitrary Waveform
- 14-bit, 125MSa/s, 256 K-point ARB
- Pattern Generator (16 bits wide, 256K depth)
- Pulse, Ramp, Triangle, Noise
- AM, FM, PM (PSK), FSK & PWM
- Linear and Logarithmic Sweeps
- USB, LAN or GPIB programming
- wavePRO Waveform Creation, editing & importing
|

|
Model 645
|
Model 725 - Multi-Trigger Digital Delay
Generator
- Trigger-pulse delay 50ns to 1370s
- Inputs: 8 external and 7 internal
- Outputs: 8 internal (to timing processors)
- Delay jitter from internal source: 200 ps
- External trigger duration: 50ns
|

|
Model 725 |
Model 745 - Digital Delay / Pulse Generator
- 250 fs time resolution
- Down to 5 fs jitter (int trigger)
- 25 ps jitter (ext trigger)
- Output risetime typically 1ns
- Selectable clock input (10MHz to 80MHz)
- Ethernet GUI - Complete Configuration Displayed
- Up to 64 Channels Displayed on one GUI
|

|
Model 745
4 or 8 channel models
|
Model 1105 - Universal Counter
- Time Interval, Frequency, Frequency Ratio, Pulse Width, Duty Cycle measurement
- Rise / Fall Time, Period, Phase, Event Counts, Voltage Peaks Measurements
- Mean, Min/Max, Delta, Standard Deviation Measurements
- Real-Time DSP for faster measurements
- Easy LAN Control
- Free Software using widely accepted SCPI commands
- Scale & Offset available for Math Functions
- 400MHz on Ch 1 & 2. 6.0GHz on Ch 3 (included)
|

|
Model 1105
|
| Model 1302 - Digital Oscilloscope
- 300 MHz Bandwidth & 2GSA/a Sample Rate
- Dual Channel + External Trigger
- 7 Versatile Trigger Modes
- USB Host and Device Port
- 20 Automatic Measurements
- Math Function + FFT
- Pass/ Fail Test
- BMP and CSV Storage
|

|
Model 1302 |